Table of Contents
Advertisement
The paper is not feeding properly
Cause
The paper is not correctly
positioned between the paper
guides.
The paper is not loaded properly.
More than one type of media is
loaded in the paper tray.
Media in use is out of
recommended weight range.
60
Suggested Solution
Align the left edge of the paper
with the left paper guide. Slide
the right paper guide lever until
it rests lightly against the right
edge of the paper.
Remove the paper from the
paper tray, fan the sheets, and
then reload the paper stack. Do
not load more than 100 sheets in
the paper tray.
If misfeeds continue, load new
paper.
Load only one type of media in
the paper tray.
Refer to Chapter 5: "Selecting
and Ordering Supplies" to ensure
that the correct media is being
used.
Advertisement
Table of Contents
