PANTONE Colors Do Not Match
Problem
Colors printed on the document do not match the Phaser 6300⁄6350 printer PANTONE
color chart.
Solution
For information about PANTONE color matching, go to
6300_6350infoSMART.
Print Area Is Not Centered on the Paper
Problem
The printed area appears outside the margins on the page.
Solution
Use the Calibrate Margins page to adjust the print area on the paper. The print area appears as
a dashed rectangle on the Calibrate Margins page; the printer does not print outside this
rectangle.
To print the Calibrate Margins page:
1.
On the control panel:
a.
Select Troubleshooting, and then press the OK button.
b.
Select
Print Quality
c.
Calibrate
Select
d.
Select
Calibrate Margins
e.
Select the appropriate tray to calibrate, and then press the OK button.
The Calibrate Margins page prints.
2.
Follow the instructions on the Calibrate Margins page.
Note:
The standard margins are 5 mm on all sides.
Problems, and then press the OK button.
Margins, and then press the OK button.
Page, and then press the OK button.
Phaser® 6300/6350 Color Laser Printer
4-12
Solving Print-Quality Problems
www.xerox.com/office/