Table of Contents
Advertisement
Clean
Align
40
Cleans the currently installed print
cartridge. Before clicking the <Clean>
button, make sure the printer is idle.
Prints a test pattern that you can use to
verify the optimum bi-directional
alignment of the print head in the
printer.
To align the cartridge, wait for the
printer to completely print the alignment
test page. Look over the nine individual
vertical alignment patterns. Determine
which pattern has the straightest lines.
If pattern zero ("0") has the straightest
lines, then there is no need to adjust the
alignment. Click <Done> to exit the
dialog.
If a pattern other than zero has the
straightest lines, then select that pattern
on the dialog box. Select Print the
Alignment Test Pattern if you want to
verify the adjustment, then click
<Align>. If you are not verifying the
adjustment, click <Done>.
Advertisement
Table of Contents
