Adjusting The Roll Units - Xerox 82xx User Manual

3.3.2.3 Adjusting the roll units

Procedure
Use the correct amount of spacers (2) to cover the space between the drawn lines (1).
Step 1 :
Determine the deviation of the roll unit using the image and table below.
Step 2 :
IF line 2 lays...
BEFORE line 1
BEHIND line 1
IF line 2 lays...
BEFORE line 1
BEHIND line 1
3-20
No Description
1 Drawn lines
2 Spacer
Adjusting the FRONT Units
Remove spacers on the left front unit or add spacers on the right front unit.
Add spacers on the left front unit or remove spacers on the right front unit.
Adjusting the REAR Units
Add spacers on the left rear unit or remove spacers on the right rear unit.
Remove spacers on the left rear unit or add spacers on the right rear unit.
THEN...
THEN...