Safety; Electrical Safety - Xerox 560 User Manual

Safety

Electrical Safety

WARNING:
Do not push objects, including paper clips or staples, into slots or openings on the printer. Making contact
with a voltage point or shorting out a part could result in fire or electrical shock.
WARNING:
Do not remove the covers or guards that are fastened with screws unless you are installing optional
equipment and are specifically instructed to do so. Power should be OFF when performing these installations.
Disconnect the power cord when removing covers and guards for installing optional equipment. Except for
user-installable options, there are no parts that you can maintain or service behind these covers.
The printer must be turned off before removing the power cord. For instructions on turning the printer off, see
Turning the Printer Off.
The following are hazards to your safety:
The power cord is damaged or frayed.
Liquid is spilled into the printer.
The printer is exposed to water.
If any of these conditions occur, do the following:
Turn off the printer immediately.
Disconnect the power cord from the electrical outlet.
Call an authorized service representative.
8 Xerox Color 550/560 Printer
User Guide