Emergency Power Off; Telephone Line Cord; Laser Safety - Xerox 560 User Manual

Safety

Emergency Power Off

If any of the following conditions occur, turn off the printer immediately and disconnect the power cable from the
electrical outlet. Contact an authorized Xerox Service Representative to correct the problem:
The printer emits unusual odors or makes unusual noises.
The power cable is damaged or frayed.
A wall panel circuit breaker, fuse, or other safety device has been tripped.
Liquid is spilled into the printer.
The printer is exposed to water.
Any part of the printer is damaged

Telephone Line Cord

CAUTION:
To reduce the risk of fire, use only No. 26 American Wire Gauge (AWG) or larger telecommunication line cord.

Laser Safety

This printer complies with laser printer performance standards set by governmental, national, and international
agencies and is certified as a Class 1 Laser Product. The printer does not emit hazardous light because the
beam is totally enclosed during all modes of customer operation and maintenance.
WARNING:
Use of controls, adjustments, or performance of procedures other than those specified in this manual can result
in hazardous radiation exposure.
10 Xerox Color 550/560 Printer
User Guide