Advertisement
MOUNTING BUFF
WHEELS
#51460, 1 HP, DUAL-SPEED MOTOR
Left Side
• Slip Spacers [E] & [F] over Arbor Shaft
to the step of the Shaft (FIG 1).
• Place a Buff Wheel Support Flange [D]
onto the shaft up to the spacers [E] &
[F] and with the cupped surface facing
outward (FIG 1).
• Push a Buff Wheel of choice (not
included) over the threaded end of the
Shaft up to the Buff Wheel Support
Flange [D] (FIG 2).
• Add another Buff Wheel Support Flange
[D] with the cupped face toward the
Buff Wheel.
• Thread Special, Left-Hand Threaded
Arbor Nut [B] onto Shaft threads up
against the Buff Wheel Support Flange
[D] (FIG 2).
• Use a wrench (not included) to snug up
the Nut while holding the Buff Wheel.
Another wrench (not included) may be
placed around the flats at the inner sur-
face of the Shaft to keep it from rotating
if required.
Right Side
• The Right-Side procedure is identical to
the Left except for using the Standard,
Right-Hand Threaded Arbor Nut [C].
To order parts and supplies: 800.343.9353 >> eastwood.com
FIG. 1
B
D
D
FIG. 2
E
F
B
D
7
Advertisement
