Advertisement
#13542, 1/2 HP BUFF MOTOR
Left Side
• Slip Spacer [E] over Arbor Shaft to the
step of the Shaft (FIG 3).
• Place a Buff Wheel Support Flange [D]
onto the shaft up to the spacer [E] and
with the cupped surface facing outward.
(FIG 3).
• Push a Buff Wheel of choice (not
included) over the threaded end of the
Shaft up to the Buff Wheel Support
Flange [D] (FIG 4).
• Add another Buff Wheel Support Flange
[D] with the cupped face toward the
Buff Wheel.
• Thread Special, Left-Hand Threaded
Arbor Nut [B] onto Shaft threads up
against the Buff Wheel Support Flange
[D] (FIG 4).
• Use a wrench (not included) to snug up
the Nut while holding the Buff Wheel.
Another wrench (not included) may be
placed around the flats at the inner sur-
face of the Shaft to keep it from rotating
if required.
Right Side
• The Right-Side procedure is identical to
the Left except for using the Standard,
Right-Hand Threaded Arbor Nut [C].
8
FIG. 3
FIG. 4
Eastwood Technical Assistance: 800.343.9353 >> tech@eastwood.com
B
E
D
D
B
D
Advertisement
