Replacing The Dry Ink Cartridge - Xerox Troy PocketPro 100 Operator's Manual

Replacing the dry ink cartridge

Operator Guide
CAUTION: To prevent dry ink spillage, remove the cartridge only
when directed to do so by a message on the display monitor.
To replace the dry ink cartridge:
1. Open the right and left doors of the printer and locate the dry
ink area at the left side of the printer. There are step by step
instructions on the panel next to the dry ink cartridge.
Figure 4-12
2. Place a dropcloth on the floor under the dry ink area.
3. Pull the empty dry ink cartridge out until it stops.
4. Move the green handle to the right (the unlatched position) to
release the cartridge and lid.
Maintaining the system
Locate dry ink area
4- 11