Radio And Telecommunications Equipment Directive (Europe Only) - Xerox Troy PocketPro 100 Operator's Manual

Radio and telecommunications equipment directive
(Europe only)
Operator Guide
radiation for the ISM equipment may have to be limited or special
mitigation measures taken.
This is a Class A product. In a domestic environment this product
may cause radio frequency interference, in which case the user
may be required to take adequate measures.
Shielded interface cables must be used with this product to
maintain compliance with Council Directive 89/36/EEC.
Certification to 1999/5/EC Radio Equipment and
Telecommunications Terminal Equipment Directive:
This Xerox product has been self-certified by Xerox for pan-
European single terminal connection to the analog public switched
telephone network (PSTN) in accordance with Directive 1999/5/
EC.
The product has been designed to work with the national PSTNs
and compatible PBXs of the following countries:
• Austria • Germany •
• Belgium • Greece
• Denmark • Iceland
• Finland • Ireland
• France • Italy
In the event of problems, contact your local Xerox representative
in the first instance.
This product has been tested to, and is compliant with, TBR21, a
specification for terminal equipment for use on analog switched
telephone networks in the European Economic area.
The product may be configured to be compatible with other
country networks. Please contact your Xerox representative if
your product needs to be reconnected to a network in another
country. This product has no user-adjustable settings.
NOTE: Although this product can use either loop disconnect
(pulse) or DTMF (tone) signaling, it should be set to use DTMF
signaling. DTMF signaling provides reliable and faster call setup.
Modification or connection to external control software, or to
external control apparatus not authorized by Xerox, invalidates its
certification.
Luxembourg • Sweden
• Netherlands • Switzerland
• Norway • United Kingdom
• Portugal
• Spain
Safety
ix