Operation
Standby Screen
Primus activates the standby mode after successful test completion,
and will display the standby screen.
From the standby screen, you can access the following functions:
•
Pre set carrier gas, O
•
Set age
•
Set ideal body weight
•
Restore site default settings
•
Set alarm limits
•
Self test results display
•
Perform the leak test
•
Delete trends
•
Default configuration
(password protected - held by Key Users and Dräger)
•
Access monitoring mode
Monitoring Mode
In monitoring mode, the Primus will measure and display gas measurements.
There is no fresh gas delivery or ventilation capability. If ventilation is required,
set the appropriate gas flow, select the appropriate ventilation mode and
press the rotary control knob to confirm.
concentration and fresh gas flow
2
9