Table of Contents
Advertisement
• Biometric recognition products are not 100% applicable to anti-spoofing
environments . If you require a higher security level, use multiple authen-
tication modes .
• Working temperature: 0°C to 50°C
• Indoor use . The device should be at least 2 meters away from the light,
and at least 3 meters away from the window .
C H A P T E R 1. OV E R V I E W
1.1. OVERVIEW
Face recognition terminal is a kind of access control device for face recog-
nition, which is mainly applied in security access control systems, such as lo-
gistic centers, airports, university campuses, alarm centrals, dwellings, etc .
1.2. FEATURES
• Supports Vanadium Oxide uncooled sensor to measure target's tempera-
ture .
• Temperature measuring range: 30°C to 45°C (86°F to 113°F), accuracy:
0 . 1 °C, deviation: ±0 .5°C .
• Recognition distance: 0 .3 to 1 .8 m .
• Fast temperature measurement mode: Detects face and takes skin-sur-
face temperature without identity authentication .
• Multiple authentication modes are available: card and temperature, face
and temperature, card and face and temperature, etc .
• Face mask wearing alert, is an Option that can be enabled .
If the recognizing face does not wear a mask, the device will prompt a voice
reminder . At the same time, the authentication or attendance is valid .
• Forced mask wearing alert, is an Option that can be enabled .
If the recognizing face does not wear a mask, the device will prompt a voice
reminder . At the same time, the authentication or attendance will be failed .
• Triggers voice prompt when detecting abnormal temperature .
• Configurable door status (open/close) when detecting abnormal tempera-
ture .
• Transmits on-line and off-line temperature information to the client soft-
ware via TCP/IP communication and saves the data on the client soft-
ware .
• Face recognition duration <0 .2 s/User; face recognition accuracy rate
≥99% .
• 6000 face capacity, 6000 card capacity, and 100,000 event capacity .
• Suggested height for face recognition: between 1 .4 m and 1 .9 m .
• Watchdog design and tamper function .
• Audio prompt for authentication result .
• NTP, manually time synchronization, and auto synchronization .
• Connects to external access controller or Wiegand card reader via Wie-
gand protocol .
• Connects to secure door control unit via RS-485 protocol to avoid the
door opening when the terminal is destroyed .
• Imports and export data to the device from the client software .
10
C H A P T E R 2 . A P P E A R A N C E
Refer to the following contents for detailed information of the face recogni-
tion terminal:
Figure 2-1. Face Recognition Terminal Diagram
11
Advertisement
Table of Contents
