Table of Contents
Advertisement
Figure 6-1. Welcome Page
2 . Tap OK to save .
NOTE
You can also change the settings in System Settings.
If you install the device indoors near the window or the face recognition
function is not working well, select Others.
If you do not configure the application mode and tap Next, the system
will select Indoor by default.
If you activate the device via other tools remotely, the system will select
Indoor as the application mode by default.
6.2. LOGIN
Login the device to set the device basic parameters . You should enter the
device activation password for the first login . Or if you have add the adminis-
trator's credential, you can login via the configured credential .
28
6.2.1. Login for First Time
You should login into the system before other device operations .
Steps
1 . Long tap on the initial page for 3 s to enter password entering page .
2 . Tap the Password field and enter the device activation password .
3 . Tap OK to enter the home page .
NOTE
The device will be locked for 30 minutes after 5 failed password
attempts.
For details about setting the administrator authentication mode, see
Adding User.
Figure 6-2. Home Page
29
Advertisement
Table of Contents
