Turntable Operation; Basic Operation - Victrola ITUT-420 Instruction Manual

SET UP
An AC/DC adaptor with an output of 12V DC 2.0A is included with the Modern
Bluetooth Stereo Turntable. This adaptor is required for operating the unit.
1. Connect the external speaker cables from the EXTERNAL SPEAKER JACK on
the back of the unit to each speaker.
NOTE: The external speaker cables are color coded, the red cable is plugged into
a red jack on both the unit and speakers (black cable into the black jacks).
2. Firmly and securely insert the DC plug of the adaptor to the DC IN Jack on the
back of the unit.
3. Plug the adaptor's AC plugs into a power outlet rated at
220-240V AC ~ 50/60Hz.
4. Turn on the unit by switching the POWER ON/OFF SWITCH to the ON position.
The POWER/FUNCTION LED INDICATOR will turn on.

BASIC OPERATION

Before use, be sure to remove the white stylus guard off of the needle. Always
make sure that the tone arm is unlocked and free to move across the record while
operating. Lock the tone arm in place again when it is not in use.
1. Slide the FUNCTION SELECTION SWITCH to the PHONO position, the
FUNCTION LED INDICATOR will turn RED.
2. Place a record on the TURNTABLE PLATTER and select the desired speed
(33 1/3 / 45 / 78) by sliding the SPEED SELECTION SWITCH to the speed
according to the type of record.
NOTE: When playing a 45 rpm record, use the included 45 rpm adaptor located
inside the accessories bag.
3. Open the TONE ARM CLIP to release the TONE ARM. Push the LIFT LEVER
backwards to raise the arm. Gently move the tone arm to the desired position
over the record. The turntable will begin to spin only when the tone arm is moved
toward the record. To begin playing, push the lift lever forward to lower the arm
slowly onto the desired position of the record.
4. If the AUTO STOP SELECTION SWITCH is turned ON, the record will stop
automatically when finished.
PLEASE NOTE: If the Auto Stop is turned ON, the record will spin only when the
tone arm is moved over the record. If the Auto Stop is turned OFF, the record will
spin even when the tone arm is in resting position.
5. To select the volume level, turn the VOLUME CONTROL KNOB to adjust the volume.

TURNTABLE OPERATION

6