Victrola VSC-550BT Operating Manual

Victrola VSC-550BT Operating Manual

Suitcase turntable with bluetooth function
Hide thumbs Also See for VSC-550BT:


Suitcase Turntable with Bluetooth Function


Table of Contents

Summary of Contents for Victrola VSC-550BT

  • Page 2 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER SERVICEABLE PART INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. DANGEROUS VOLTAGE: The lighting flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage”...
  • Page 3 Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to  which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. ...
  • Page 4 (6) Clean only with dry cloth The appliance should be cleaned only as recommended by the manufacturer. (7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Slots and openings in the cabinet and in the back or bottom are provided for ventilation, to ensure reliable operation of the product and to protect it from overheating.
  • Page 5 (15) Power source This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company.
  • Page 6 (21) Replacement parts When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original parts. Unauthorized substitutions may result in fire or electric shock or other hazards. (22) Safety check Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in...
  • Page 7 BEFORE USING THE UNIT As the unit may become warm during operation, always leave sufficient space around the unit for ventilation. The voltage supplied to the unit should match the voltage as printed on the rear panel. If you are in any doubt regarding this matter, consult an electrician. Choose the installation location of your unit carefully.
  • Page 8: Handling Records

    HANDLING RECORDS edges or the lable. Make sure Do not touch the record's grooves. Only handle records by the your hands are clean. Skin oils from even clean hands can leave a residue on the record surface that will gradually deteriorate the quality of your record. groove label edge...
  • Page 9: How To Replace The Stylus

    HOW TO REPLACE THE STYLUS The stylus should last about 50 hours under normal use. However, it is recommended that the stylus be replaced as soon as you notive a change in sound quality. Caution: Do not remove or bend the sylus. To avoid injury, do not touch the needle.
  • Page 10: Location Of Controls

    Location of Controls Turntable and Function Panel 1. Turntable platter 2. Turntable spindle 3. 45 RPM adapter 4. Lever 5. Tone arm holder 6. LINE IN jack 7. Speed selector LINE IN 8. Function knob 9. Tone arm 10.Power ON-OFF/ Volume knob INDICATOR 11.
  • Page 11 Operation General Operation: 1. Open the top cover as the illustrated follows: 2. Connected the unit to AC power as instructed earlier. 3. Turn the Power ON/OFF--Volume knob clockwise to power on the unit and set the volume to the The indicator will illuminate.
  • Page 12 Listening through Bluetooth (BT) Bluetooth: For first time use or re-pairing to a new BT Device, pairing it as below: 1. Power on the unit and turn the Function selector to BT position as the instructed earlier. The color of indicator will turn to Blue and blink.
  • Page 13 Listening a Record 1. In first time use, take off the protective cover from the stylus as the illustrated below: Plastic protective cover (White color) 2. Place the Record on the center spindle. Note: If you are playing a 45 RPM Single (small size record), place the supplied 45 RPM adapter to the center spindle then place the record on it.
  • Page 14 Other Connections LINE IN: LINE OUT: Listen music from the external Audio Player as follows: To listening from external Audio Amplifier: 1. Connect one end of the Audio Connection Cable to 1. Connect one end of the RCA Audio to the Phones Jack; Line Out Jack or AUX Out Jack Connection cable to the Line IN Jacks on on the external Audio Player.
  • Page 15: Troubleshooting Guide

    Troubleshooting Guide Symptom Possible Cause Solution Power AC/DC Adaptor had not Connected the AC/DC connected to unit or wall Adaptor to the unit outlet wall outlet Turn the Power No power ON-OFF/Volume knob Power ON-OFF/Volume clockwise to power on knob is on power off position the unit and set the volume to the desired level...
  • Page 16 General Specifications Power Source: 9V, 1000mA, Audio Power: W (RMS) x 2 Impendence of Speakers: 4 Ohm; 3W x 2 BT Version: BT Effective Range: 32 feet in open area Turntable: Speed: 33; 45; 78 rpm selectable Type of Stylus: CSC-015 Accessories 1 x User’s Manual...

Table of Contents