Safety Precautions; Caution: Power Lock-Out Procedure - Challenge JF Instructions And Parts Manual

This safety symbol means CAUTION/WARNING - PERSONAL SAFETY INSTRUCTION. Read
the instructions because it has to do with safety. Failure to comply with the following instruc-
tions may result in personal injury.
•
This machine is designed and safeguarded for ONE PERSON operation. NEVER operate the machine
with more than one person.
•
Safety of this machine is the responsibility of the user and operator. Use good judgement and com-
mon sense when working with and around this machine.
•
READ and understand all instructions thoroughly before using the machine. If questions still remain,
call your Authorized Challenge Dealer - Failure to understand operating instructions may result in
personal injury.
•
Only trained and authorized persons should operate the machine.
•
DO NOT ALTER SAFETY GUARDS OR DEVICES, they are for your protection and should not be al-
tered or removed. Severe lacerations could result.
•
DISCONNECT POWER before cleaning, lubricating, servicing, or making adjustments not requiring
power. Lock the disconnect switch in the OFF position, see Power Lockout Procedure below.
•
HIGH SPEED DRILL - Keep rags, loose clothing and long hair away form rotating drill. Personal injury
could result from items being caught on drill.
•
OBSERVE ALL CAUTION PLATES AND LABELS on this machine.
•
KEEP FOREIGN OBJECTS off table and away from drill.
•
BE EXTREMELY CAREFUL when handling and changing the drills. Severe lacerations or dismember-
ment could result from careless handling procedure.
•
KEEP THE FLOOR around the machine free of trim, debris, oil and grease.
•
If the machine sounds or operates abnormally, turn it off and consult the Trouble Shooting section of
this manual. If the problem cannot be corrected, have it checked by a qualified service person or your
Authorized Challenge Dealer.
•
CRUSH HAZARD, keep feet off the pedal when handling paper under the clamp. DO NOT REST FOOT
ON PEDAL at any time!
•
DO NOT REACH UNDER THE DRILL AND CLAMP AREA!
•
DO NOT OPERATE WITH ANY GUARDS REMOVED! Replace all guards after adjusting, lubricating or
servicing the machine.
•
SEVERE LACERATIONS - Contact with high speed drill could cause severe injury. Always turn ma-
chine off and wait for drill to stop before removing drill bits. Keep hands away from drill(s) when
operating.

CAUTION: POWER LOCK-OUT PROCEDURE

For maximum safety and to prevent unauthorized
use, turn the power switch to the OFF position and
disconnect the power cord whenever adjusting,
lubricating, or making repairs to the machine.
6

SAFETY PRECAUTIONS

(fig. 1)
F.330-J/APR 97