Safety; Precautions; Power Lockout Procedure - Challenge Handy-Drill Instructions And Parts Manual

2.0 Safety

2.0 Safety

2.1 Precautions


This machine is designed for one-person operation. Never operate the machine with more than
one person.

Always wear safety glasses while operating this machine.

Safe use of this machine is the responsibility of the operator. Use good judgment and common
sense when working with and around this machine.

Read and understand all instructions thoroughly before using the machine. If questions remain,
contact the dealer from which you purchased this machine. Failure to understand the operating
instructions may result in personal injury.

Only trained and authorized people should operate this machine.

DO NOT ALTER SAFETY GUARDS OR DEVICES. They are for your protection. Severe
personal injury may result.

Disconnect power before cleaning or performing maintenance. See Section 2.2 Power Lockout
Procedure.

Observe all caution labels on this machine.

Be sure the drill is plugged into a properly grounded outlet.

Be sure there is sufficient power to operate the drill properly.

Observe all caution plates mounted on the drill.

Keep foreign objects off table and away from the spindle and bit.

BE EXTREMELY CAREFUL when handling and changing drill bits. Drill bits are sharp. Severe
lacerations could result from careless handling procedures.

If the drill sounds or operates unusually, have it checked by a qualified service person.

CUT/CRUSH HAZARD, keep hand and fingers from under the clamp and spindle while drilling
paper. DO NOT REACH UNDER THE DRILL AREA WHILE OPERATING!

2.2 Power Lockout Procedure

For maximum safety while making adjustments or repairs to your machine, be sure to disconnect
power to the machine. Disconnect the power plug from its socket
4
Figure 1 - Main Power Disconnect