Table of Contents
Advertisement
the side gage to the far left of the table. You may also
want to lock the auto trip mechanism out of the way.
Align the knife holder to the holes for the pressure foot,
press down on the holder and slide it into place.
Attach the holder to the machine with the knurled nuts
that held the pressure foot in position.
F.330-J/APR 97
Install the knife blade from the rear of the attachment,
slide it up into position, and tighten the socket screw to
hold it in place.
Depth of Cut
Adjustment
Screw
The depth of cut may be adjusted with the knurled screw
on the right side of the attachment. The knife blade
should just make it through the stock and not cut into
the fiber block.
21
Advertisement
Table of Contents
