Introduction - Challenge JF Instructions And Parts Manual

WELCOME to the family of Challenge® users. Challenge has been developing and manufacturing Graphics Arts
Equipment for over 100 years and is today one of the world's leading producers and distributors of Paper Cutters,
Paper Drills and Bindery Equipment.
SAFETY ALERT! This symbol means CAUTION OR WARNING: Personal safety instructions!
Pay special attention to the instructions in bold type. Personal injury may result if the precautions are
not read and followed. See SAFETY PRECAUTIONS, page 6.
•
This machine is designed for ONE PERSON OPERATION ONLY!
•
Always DISCONNECT THE POWER before working on this machine.
•
DO NOT OPERATE WITH ANY GUARDS REMOVED! Replace all guards before operating.
•
CRUSH HAZARD - Keep hands, hair, cleaning rags, & loose clothing away from drills.
READ THIS MANUAL BEFORE OPERATING! Follow precautions and instructions given and you should have
years of trouble-free operation. If after reading the manual questions still remain, contact your Authorized Challenge
Dealer.
FOR PARTS AND SERVICE contact the Authorized Challenge Dealer from whom you purchased your machine.
Use the illustrations and parts lists at the back of this manual to identify the correct parts needed. Always give
the SERIAL NUMBER and MODEL of your machine to insure that the correct parts are sent as soon as possible.
Take a few minutes right now to RECORD YOUR MACHINE SERIAL NUMBER in the space provided on the
front cover of this manual. Also be sure to fill out the warranty card accompanying this manual and return it
DIRECT TO CHALLENGE.
If you bought a used machine, it is important to have the following information on record at Challenge. Copy this
page, fill in the information and send it care of: The Challenge Service Department, 6125 Norton Center Drive,
Norton Shores, MI 49441-6081.
CHALLENGE MODEL
ATTN
ADDRESS
CITY
PHONE
DEALER'S NAME AND CITY
It is very important that you read and understand the conditions outlined in the Warranty Information Sheet
included with the manual information package.
The Warranty Information Sheet must be filled out completely, returned, and be ON-FILE at THE CHALLENGE
MACHINERY COMPANY in order for the warranty to be issued for this machine.
Challenge® is a registered trademark of The Challenge Machinery Company. 6125 Norton Center Drive, Norton Shores, MI 49441-6081.
Copyright © 1997 by The Challenge Machinery Company. All rights reserved. Printed in the U.S.A.
2

INTRODUCTION

WARRANTY INFORMATION
PLEASE REVIEW THE ENCLOSED WARRANTY SHEET!
SERIAL NUMBER
COMPANY
STATE
DATE INSTALLED
ZIP
F.330-J/APR 97