Introduction - Challenge EH-3C Service Manual

Paper drilling machine
Hide thumbs Also See for EH-3C:
Table of Contents

Advertisement

WELCOME to the family of Challenge® users. Challenge has been developing and manufacturing Graphics Arts
Equipment for over 100 years and is today one of the world's leading producers and distributors of Paper Cutters,
Paper Drills and Bindery Equipment.
SAFETY ALERT! This symbol means CAUTION OR WARNING: Personal safety instructions! Pay
special attention to the instructions in bold type. Personal injury may result if the precautions are not
read and followed. See SAFETY PRECAUTIONS, page v.
This machine is designed for ONE PERSON OPERATION ONLY!
Always DISCONNECT THE POWER before working on this machine.
DO NOT OPERATE WITH ANY GUARDS REMOVED! Replace all guards before operating.
CRUSH HAZARD - Keep hands, hair, cleaning rags, & loose clothing away from drills.
FOR PARTS AND SERVICE contact the Authorized Challenge Dealer from whom you purchased your machine.
Always give the SERIAL NUMBER and MODEL of your machine to insure that the correct parts are sent as soon
as possible.
Challenge® is a registered trademark of The Challenge Machinery Company. 6125 Norton Center Drive, Norton Shores, MI 49441-6081.
Copyright © 2003 by The Challenge Machinery Company. All rights reserved. Printed in the U.S.A.
ii

INTRODUCTION

F.352-KT/EH-3C DRILL/AUG 03

Advertisement

Table of Contents
loading

Table of Contents