Aligning Your Print Heads - Xerox WorkCentre m940 Getting Started Manual

A L I G N I N G

Aligning Your Print Heads

For optimum print quality, your print
heads should be aligned. To align your
print heads follow these instructions.
On your control panel press the menu
button . Press the down
navigation button until option
"3. Maintenance" displays. Press the
navigation button until
right
"1. Clean Print Head1" displays.
Press the select button
heads will complete a priming cycle
which lasts approximately 2 minutes.
On your control panel, press the menu
button . Press the down
button until "3. Maintenance" displays.
Press the right navigation button
until option "6. Align Print Head"
displays. Press the select button
An alignment page will print out.
Find the patterns that are best aligned in
line A. Then select the corresponding
pattern numbers on your control panel
by using the left
navigation buttons. Press the select
button to store your choice for
pattern A.
Go through the same procedure for
patterns B, C, and D until the display
reads "Ready to Copy". The alignment
is now complete.
Y O U R
. The print
navigation
.
and right
P R I N T H E A D S
1
2
3
A
B
C
D
G e t t i n g S t a r t e d
13