Mitsubishi Electric 800 Series Instruction Manual page 15

Symbol
(a) Plug-in option connection connector
(b) Control logic switch
Voltage/current input switch
(c)
(d) PU connector
(e) Operation panel
USB mini B connector
(f)
(g) Control circuit terminal block
(h) Main circuit terminal block
(i) Comb-shaped wiring cover
(j) Front cover
(k) Cooling fan
*1 Refer to the FR-E800 Instruction Manual (Function).
*2 Refer to the FR-E800 Instruction Manual (Maintenance).
14
1. Introduction
1.2 Component names
Name
Connects a plug-in option or a communication option.
Select the sink logic (SINK) or the source logic (SOURCE).
Select voltage or current for the input via terminals 2 and 4.
Used for the RS-485 communication.
Operates and monitors the inverter.
Connector for a personal computer. Enables communication with FR
Configurator2.
Connects cables for the control circuit.
Connects cables for the main circuit.
This cover is removable without unplugging cables.
Remove this cover for wiring.
Cools the inverter
Description
Refer to
page
Instruction
Manual of
the option
50
*1
61
*1
64
44
39
25
25
*2