Adjust Time; Auto-Off; Auto-Start; Setting The Temperature - DeLonghi ECAM22.32 Series Instructions For Use Manual

Bean to cup espresso and cappuccino machine
Table of Contents

Advertisement

Adjust time

To adjust the time on the display, proceed as follows:
1. Press the MENU button to access the menu;
2. Press the
or
displayed;
3. Press the button
4. Press the
or
5. Press the
button to confirm;
6. Press the
or
button to change the minutes;
7. Press the
button to confirm.
The time is set: press MENU to exit menu.

Auto-off

Auto-off can be set so that the appliance turns off after 15 or 30
minutes, or after 1, 2 or 3 hours.
1. Press the MENU button to access the menu;
2. Press the
or
button until "Auto-off" is displayed;
3. Press the button
4. Press the
or
until the number of minutes/hours of
operation is displayed (15 or 30 minutes, or 1, 2 or 3 hours);
5. Press the
button to confirm.
The auto-off is set. Press MENU to exit menu.

Auto-start

You can set the auto-start time in order to have the appliance
ready for use at a certain time (for example in the morning) so
you can make coffee immediately.
Please note :
To enable this function you must ensure the time is set correctly.
1. Press the MENU button to access the menu;
2. Press the
or
button until "Auto-start" is displayed;
3. Press the
button and "Enable?" is displayed;
4. Press the
button to confirm;
5. Press the
or
6. Press the
button to confirm;
7. Press the
or
8. Press the
button to confirm;
9. Then press MENU to exit menu.
Once the time has been confirmed, activation of auto-start is
indicated by the symbol
time and under the Auto-start item in the menu.
To disable the function:
1. Select auto-start from the menu;
2. Press the
button and "Disable?" is displayed;
3. Press the
button to confirm.
The symbol
is no longer displayed.

Setting the temperature

If you want to modify the temperature of the water used to
make the coffee (low, medium, high), proceed as follows:
button until "Adjust time" is
;
button to change the hour;
;
button to choose the hour;
button to change the minutes;
which is displayed alongside the
1. Press the MENU button to access the menu;
2. Press the
or
displayed;
3. Press the button
4. Press the
temperature is displayed (low, medium, high);
5. Press the
button to confirm.
The temperature is set. Press MENU to exit menu.

Energy saving

Use this function to enable or disable Energy Saving. When
enabled, the function reduces energy consumption in
compliance with EU regulations. When energy saving mode is
enabled an asterisk appears under "Energy saving" in the menu.
1. Press the MENU button to access the menu;
2. Press the
or
displayed;
3. Press the
displayed;
4. Press the
button to enable or disable the energy
saving mode;
Then press MENU to exit menu.
When the function is enabled, if the machine is not used for
about 1 minute "Energy saving" is displayed.
Please note :
When in energy saving mode, a few seconds may elapse before
the first coffee is delivered as the appliance must heat up
again.

Setting water hardness

For instructions on setting water hardness, see page 15.

Setting the language

To change the language on the display, proceed as follows:
1. Press the MENU button to access the menu;
2. Press the
or
displayed;
3. Press the button
4. Press the
or
displayed ;
5. Press the
button to confirm;
The language is set. Press MENU to exit menu.

Install filter

For instructions on installing the filter, see section on "Installing
the filter" (page 15).

Replacing the filter

For instructions on replacing the filter, see section on "Replac-
ing the filter" (page 10).
10
button until "Set temperature" is
;
or
button until the required
button until "Energy saving" is
button and "Enable?" or "Disable?" is
button until "Set language" is
;
button until the required language is

Advertisement

Table of Contents
loading

Table of Contents