Adjust Time; Auto-Start; Auto-Off (Standby); Cup Warmer - DeLonghi PrimaDonna Elite Instructions For Use Manual

Hide thumbs Also See for PrimaDonna Elite:
Table of Contents

Advertisement

Available languages

Available languages

7. "CONFIRM RESET?": to confirm press the selection arrow
corresponding to " OK" (to cancel, press the selection
arrow corresponding to "
8. "DEFAULT VALUES SET": press " OK".
The beverage has been reset to the default values. Proceed with
the other beverages or go back to the homepage by pressing the
arrow corresponding to "
Please note!
To change the beverages in another profile, go back to the
homepage, select the required profile (B11) and repeat the
procedure.
To reset all the beverages in the profile to the default val-
ues, see section "7.16 Default values ".

7.5 Adjust time

To adjust the time on the display (B1), proceed as follows:
1. Press the selection arrow (B2) corresponding to the "
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to "NEXT>" until "
appears on the display;
3. Press the selection arrow corresponding to "
TIME": The time setting panel appears on the display;
4. Adjust the time by pressing the selection arrows corre-
sponding to
(increase) or
hours (H) and minutes (MIN);
5. To confirm, press the selection arrow corresponding to " OK"
(to cancel, press the selection arrow corresponding to "
ESC") and press the selection arrow corresponding to "
ESC" to go back to the homepage.
The time is now set.

7.6 Auto-start

You can set the auto-start time in order to have the appliance
ready at a certain time (for example in the morning) so you can
make coffee immediately.
Please note!
To enable this function, the time must already be set correctly
(see section "7.5 Adjust time
To enable auto-start, proceed as follows:
1. Press the selection arrow (B2) corresponding to the "
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to "NEXT>" until "
appears on the display;
3.
Press the selection arrow corresponding to "
TO-START". Disable (or enable) the function by pressing
the selection arrow corresponding to
ESC");
ESC" twice.
SET TIME"
(decrease) for the
").
AUTO-START"
(or
);
4.
Press the selection arrow corresponding to "
The time setting panel appears on the display (B1);
5. Adjust the time by pressing the selection arrows corre-
sponding to
hours (H) and minutes (MIN);
6. To confirm, press the selection arrow corresponding to "
OK";
7. Press the selection arrow corresponding to "
to go back to the homepage.
The auto-start time is now set and the corresponding symbol is
displayed to indicate that the function has been enabled.
Please note!
When the appliance is turned off using the main switch (A21),
the auto-start setting (if enabled) is lost.

7.7 Auto-off (standby)

"
Auto-off can be set so that the appliance goes off after 15 or 30
minutes, or 1, 2 or 3 hours.
To programme Auto-off, proceed as follows:
1. Press the selection arrow (B2) corresponding to the "
symbol (B8) to enter the menu;
SET
2. Scroll through the menu items by pressing the selection
arrow corresponding to "NEXT>" until "
appears on the display;
3. Press the selection arrow corresponding to "
AUTO-OFF";
4. Select the required time interval by pressing the selec-
tion arrows corresponding to
(decrease);
5. To confirm, press the selection arrow corresponding to "
OK";
6. Press the selection arrow corresponding to "
back to the homepage.
Auto-off is now programmed.

7.8 Cup warmer

To warm the cups before making coffee, you can enable the cup
warmer (A6) and rest the cups on the shelf.
1. Press the selection arrow (B2) corresponding to the "
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
"
arrow corresponding to "NEXT>" until " CUP WARMER"
appears on the display;
3. Press the selection arrow corresponding to "CUP WARMER"
to disable (
4. Press the selection arrow corresponding to "
AU-
back to the homepage.
7.9

Energy saving

Use this function to enable or disable energy saving. When en-
abled, the function reduces energy consumption in compliance
with European regulations.
10
(increase) or
(decrease) for the
(increase) or
) or enable (
) the function.
SET TIME".
ESC" twice
"
AUTO-OFF"
ESC" to go
"
ESC" to go

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ecam65055Ecam650.55.ms

Table of Contents