Parkside PHWW 1200 A1 Translation Of The Original Instructions page 17

in the safe use of the device
and understand the resulting ha-
zards.
• Children must never play with
the device.
• Cleaning and user maintenance
must not be carried out by child-
ren if they are not supervised.
• If there are people in the water,
the device must not be operated.
• Take appropriate measures to
keep children away from the
running device.
• Dispose of the packaging mate-
rial properly.
• Do not use the device near flam-
mable liquids or gases. There is
a risk of fire or explosion if this
advice is not heeded.
• Do not use for water with abra-
sive particles such as sand. The
pumping of aggressive, abrasive
(lubricating), caustic, flammable
(e.g. motor fuels) or explosive li-
quids, salt water, detergents and
foods is not allowed. The tempe-
rature of the pumped liquid must
not exceed 35 °C.
• Store the device in a dry place
and out of reach of children.
Caution! This is how to avoid
damage to the equipment
and possible personal injuries
resulting from this:
• Do not work with a damaged or
incomplete device or one which
has been converted without the
permission of the manufacturer.
Before commissioning, have a
specialist check that the required
electrical protective measures
are in place.
• Do not carry or secure the de-
vice by the cable or the hose.
• Protect the device from frost and
from running dry.
• Use only original accessories
and do not carry out any modi-
fications.
• Please read the information rela-
ting to the topic "Cleaning and
Storage" in the instruction manual.
All other measures, and opening
the device in particular, must be
carried out by a qualified electri-
cian. Always contact our service
centre in the case of repairs.
Electrical safety:
Caution: This is how to avoid
accidents and injuries from
an electric shock:
• When operating the device, the
mains plug must be freely ac-
cessible after installation.
• Before you commission your
new domestic water system,
have it checked by a specialist:
- Grounding, zeroing, residual
current devices must comply
with the safety regulations of
energy-supply companies and
function properly,
- Protect electrical connections
against moisture.
- If there is a risk of flooding,
install the plug connections in
a flood-proof area.
• Make sure that the mains volta-
ge matches the details on the
type plate.
• Perform the electrical installati-
on in accordance with national
regulations.
GB IE
17