General Description; Scope Of Delivery; Overview; Description Of Functions - Parkside PHWW 1200 A1 Translation Of The Original Instructions

Domestic water pump
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 14
This device is not suitable for commercial
use. The warranty is void in the case of
commercial use.
The operator or user is responsible for
any accidents or personal injury and/or
material damage to third parties or their
property.
The manufacturer is not liable for damage
caused by improper use or incorrect ope-
ration.

General description

An illustration of the most im-
portant functional components
can be found on the fold-out
page.

Scope of delivery

Carefully remove the device from the pa-
ckaging and check whether all the parts
listed below are present and complete:
Device
Special key
Adapter with backflow stop
Instruction manual
Dispose of the packaging material
properly.

Overview

1 Filter cap
A
2 Water particle filter
3 Covering cap
4 Water outlet
5 Carrying handle
6 Pump
7 Pressure accumulator
8 Drillhole for fixed installation
9 Mains connection cable
10 Drain screw
11 Pressure gauge
12 Automatic switch
13 Pressure hose
14 Water inlet
15 On/Off switch
16 Protective cap for air valve
17 Air valve
18 Special key
19 Adapter with backflow stop

Description of functions

The domestic water system automatically
transports water. The pump switches on
depending on the pressure and transports
water.
The switch-on point is factory-set to 1.5
bar (0.15 MPa).
The cut-off pressure is factory-set to 3 bar.
This is a discharge head of 30 metres. The-
se settings allow the system to achieve the
highest efficiency in terms of performance
and longevity. The cut-off pressure is ad-
justable. With a cut-off pressure of 5 bar,
the device achieves a discharge head of
50 metres. This adjustment may only be
carried out by a specialist.
Please refer to the descriptions below for
information on how the operating elements
work.

Technical data

Domestic Water
Pump ....................PHWW 1200 A1
Nominal input voltage ...... 230 V~, 50 Hz
Power consumption ....................1200 W
Weight ...................................... 14,5 kg
Tank volume .................................... 24 l
Suction height ..........................max. 8 m
Maximum flow rate (Qmax) ........5000 l/h
Maximum discharge
head - pump (Hmax) ......................50 m
Maximum discharge head -
pressure accumulator (preconfigured) .30 m
GB
IE
15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

304645 1904

Table of Contents