Reinstalling The Creo Application - Xerox CSX 2000 Installation Manual

Reinstalling the Creo Application

Reinstalling the Creo Application

To reinstall the Creo application:
1. Place the Application Software CD in the CD-ROM drive, and
close the CD-ROM Drive.
Wait for the LED on the CD-ROM drive to stop blinking before proceeding.
2. In the SPIRE splash screen that appears, click Start.
The Adobe Acrobat setup begins.
3. After the Adobe Acrobat setup is complete, the CSX2000 Color
Server installation starts. When the License Agreement window
opens, click Yes to continue the CSX2000 Color Server
installation.
4. When the installation is complete, remove CD #2 from the CD-
ROM drive.
The system restarts automatically.
After the computer restarts, the Configuration Wizard appears.
5.
Proceed to Section The Configuration Wizard on page 128, if a
configuration backup is available. Proceed to Section The
Configuration Wizard (if configuration recovery fails or is
unavailable) on page 135 if there is no back up and the system
configuration must be done manually.
127