X E R O X D O C U C O L O R 2 0 0 0 S E R I E S
C U S T O M E R E X P E C T A T I O N S D O C U M E N T
Token Ring Enablement Kit
To enable the installation on a Token Ring network, an optional Token Ring kit must be
purchased from Xerox and installed in the RIP. Ensure your Sales Representative or
Analyst has defined these requirements if your network is Token Ring. Only the Token
Ring RJ45 connector is supported. Do not use the DB9 connector.
The DocuColor 2000 CSX Color Server supports the following printing services:
LPD (Line Printer Daemon)— Allows printing in TCP/IP networks using an LPR client
and supporting RFC 1179, the Berkeley LPR protocol. Supports direct socket
interface via port 9100.
PAP (Printer Access Protocol)— Allows printing in AppleTalk networks.
NetBIOS printing and file sharing over TCP/IPand IPX.
NFS file sharing
Novell IPX/SPX NDS
G3 Power Macintosh or better is strongly recommended.
Operating system: V9.2.1 or higher.
Recommended memory: A minimum of 64 MB is recommended.
Required platform: PC platform capable of running supported operating system.
Operating system: Windows 98/2000/ME/XP, Windows NT 4.x (Service Pack 6a or
Protocols: TCP/IP, NetBEUI.
Recommended memory: Operating system dependent, e.g., Windows 98. 64 MB
minimum to print.
March 28, 2002
V e r s i o n 2 . 0