Symbology; Electrical Safety - Xerox CopyCentre C75 User Manual

Symbology

Electrical Safety

CAUTION
Page 2
This symbol on the machine indicates heated surface
Ensure that the power connection for your machine satisfies
these requirements.
Model
WorkCentre Pro 90
CopyCentre C90
WorkCentre Pro 65/75
CopyCentre C65/C75
1. The power receptacle for the machine must meet the
requirements stated on the data plate on the rear of the
machine.
2. The socket outlet shall be installed near the equipment and
shall be easily accessible.
3. Use only the power cable supplied with this
equipment.Plug the power cable directly into a properly
grounded electrical outlet. Do not use an extension cord. If
you are not sure whether or not an outlet is properly
grounded, consult a qualified electrician.
Power Requirements
220-240V Outlet
Dedicated 20A circuit
220-240V Outlet
10A or 13A line. The
equipment must be
connected to a grounded
mains outlet
Xerox WorkCentre Pro/CopyCentre User Guide