Using Reduction/Enlargement - Xerox CopyCentre C75 User Manual

Using Reduction/Enlargement

HINT
TIP
Page 52
Typical Application
Use the automatic Reduction/Enlargement features to adjust
the size of the output image.
Procedure
1. Load your originals.
2. Make your programming selections by touching the
screen. The most common selections are on the Basic
Copying tab (Output, 2-sided Copy, Reduction/
Enlargement, and Paper Supply).
3. Use the keypad to enter the number of copy sets.
4. In the Basic Copying tab under Reduce/Enlarge, select an
existing preset or press the More...button. Select from the
additional presets or enter your desired Reduction/
Enlargement percentage and press the Save button.
5. Press the Start (
Custom Auto% will fill the copy page by stretching the image
to the edges of the copy page.
Normal Auto% will proportionally enlarge the image until it
fills the copy page.
When using the Document Glass, you can enlarge an image
up to 400%. Using the Document Feeder you can enlarge up
to 300%.
) button.
Xerox WorkCentre Pro/CopyCentre User Guide