In the Configuration window, define the configuration data values for the measuring input.
1. Double-clicking in the project navigator below the measuring input on the Configuration
element displays the window in the working area.
2. Assign the assignment partner MI _1 of the technology module to the input.
Figure 3-23
3. Confirm with OK.
Further information
Further information on configuring the output cam and measuring input technology objects can
be found in the
Manual .
See also
Service and maintenance (Page 65)
3.3.5.3
Linking symbolic I/O variables with TM Timer DIDQ
You can address digital I/O channels using symbolic variables in the user program.
Precondition
The I/O channels are configured as described under Chapter Configuring I/O channels
(Page 48).
Technology Modules TM Timer DIDQ for SIMOTION SCOUT and SIMOTION SCOUT TIA
Commissioning Manual, 01/2015
Assignment of measuring input input to TO measuringInput
SIMOTION Motion Control Output Cams and Measuring Inputs Function
Configuring
3.3 SIMOTION SCOUT TIA
55