Siemens TM Timer DIDQ Commissioning Manual page 27

Properties of the technology module
The object properties for the TM Timer DIDQ technology modules can be opened in the HW
configuration via the context menu or by double-clicking the module in the detail view.
1. To open the context menu, select the TM Timer DIDQ technology module with the right
mouse key.
2. Select Object properties. The following dialog box opens.
Figure 3-6
You can view or change the following properties in the object properties:
● General tab
– Short designation, order number, name
– Comments
● Addresses tab
Here you can assign the module one start address each for the inputs and outputs. The
end addresses are calculated automatically.
Technology Modules TM Timer DIDQ for SIMOTION SCOUT and SIMOTION SCOUT TIA
Commissioning Manual, 01/2015
Properties of the TM Timer DIDQ 10x24V technology module
The short designation, the information below it, and the ordering number are identical
to the entries in the Hardware Catalog window.
In the Name field you can find the short description of the module, which can be changed
according to your specifications. When you change the description, the new description
is displayed in the configuration table.
You can enter, for example, the application of the module in this field.
Configuring
3.2 SIMOTION SCOUT
27