Creating And Configuring A Technology Module - Siemens TM Timer DIDQ Commissioning Manual

Note
For further information on configuration of the PROFINET communication please refer to the
SIMOTION SCOUT TIA Configuration Manual.
Note
The procedures contained in this section assume that the user has a general understanding
of TIA Portal or SCOUT TIA.
Note
Please note that interface module ET 200SP – in conjunction with technology module TM Timer
DIDQ – can be operated with a minimum PROFINET clock cycle of 500 μs and the ET 200
MP interface module in conjunction with the TM Timer DIDQ technology module, with a
minimum PROFINET clock cycle of 250 μs – depending on the quantity structure.
3.3.3

Creating and configuring a technology module

Procedure
1. Switch to the network view in the TIA Portal.
2. The device configuration opens by double-clicking on the ET 200MP interface module.
Technology Modules TM Timer DIDQ for SIMOTION SCOUT and SIMOTION SCOUT TIA
Commissioning Manual, 01/2015
Configuring
3.3 SIMOTION SCOUT TIA
43