Configuration of the SIMATIC Manager
6.2 Hardware configuration
6.2.3
Configuring the analog module
Overview
SIMATIC Manager inserts the analog module with its default settings. You can modify the
parameters to change the sensor types, diagnostics and interrupt capabilities.
Mounting the example station
The table shows, which parameters have to be set for our example station.
SM331 functions of the example station
Functions
Process reactions
Encoder 1
Encoder 2 & 3
6-10
Description
Diagnostics – enabled
•
Hardware interrupt when limit exceeded - enabled
•
2-Wire current transducer
•
Group diagnostics
•
Check for wire break
•
Measuring range 6 mA and 18 mA
•
4-Wire current transducer
•
Group diagnostics
•
Check for wire break
•
Measuring range 6 mA and 18 mA
•
SM331; AI 8x12 Bit Getting Started part 1: 4 -20mA
Getting Started, 11/2006, A5E00253410-02