Extron electronics NAVigator Setup Manual page 5

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Figure 7.
Network Connection Pane
3. To change the settings, click Edit (see figure 7,
4. If desired, click on the DHCP switch (
5. If desired, click in the desired editable field (
NOTES:
•
Fields that are available for editing are underlined.
•
DHCP must be off to edit these fields.
6. Repeat step 4 as necessary for other values.
7. Click Save ( 1 ).
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
). The Edit button changes to Save.
1
2 ) to toggle Dynamic Host Configuration Protocol on and off.
) and edit it as desired.
3
5