Cisco 7941G Administration Manual page 10

Feature Key Capacity Increase for Cisco Unified IP Phones
Step 5 Scroll to the Expansion Module Information section.
Step 6
To add support for one expansion module on Cisco Unified IP Phones 7961G and 7961G-GE, in the Module
1 field, select 7914 14-Button Line Expansion Module.
Step 7 To add support for one expansion module on Cisco Unified IP Phone 7962G, in the Module 1 field, choose:
• 7914 14-Button Line Expansion Module for the Cisco Unified IP Phone Expansion Module 7914
• 7915 12-Button Line Expansion Module or 7915 24-Button Line Expansion Module for the Cisco
• 7916 12-Button Line Expansion Module or 7916 24-Button Line Expansion Module for the Cisco
Step 8 To add support for a second expansion module on Cisco Unified IP Phones 7961G and 7961G-GE, in the
Module 2 field, choose 7914 14-Button Line Expansion Module.
Step 9 To add support for a second expansion module on Cisco Unified IP Phone 7962G, in the Module 2 field,
choose:
• 7914 14-Button Line Expansion Module for the Cisco Unified IP Phone Expansion Modules 7914
• 7915 12-Button Line Expansion Module or 7915 24-Button Line Expansion Module for the Cisco
• 7916 12-Button Line Expansion Module or 7916 24-Button Line Expansion Module for the Cisco
Step 10 Click the Save icon.
Step 11 Click OK.
Step 12 Click Apply Config.
Step 13 Click OK.
Feature Key Capacity Increase for Cisco Unified IP Phones
The Cisco Unified IP Phone Expansion Modules 7915 and 7916 attach to your Cisco Unified IP Phone 7962G,
adding up to 48 extra line appearances or programmable buttons to your phone. The line capability increase
includes Directory Numbers (DN), line information menu, line ring menu, and line help ID.
You can configure all 48 additional keys on the Cisco Unified IP Phone Expansion Modules 7915 and 7916.
Cisco Unified IP Phones 7961G-GE and 7941G-GE do not support Cisco Unified IP Phone Expansion
Note
Modules 7915 and 7916.
Use the Phone Button Template Configuration to configure the buttons.
Cisco Unified Communications Manager includes several default phone button templates. When adding
phones, you can assign one of these templates to the phones or create a new template.
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco
Unified Communications Manager 9.0 (SCCP and SIP)
10
Unified IP Phone Expansion Module 7915
Unified IP Phone Expansion Module 7916
Unified IP Phone Expansion Module 7915
Unified IP Phone Expansion Module 7916
In the Firmware Load Information section, there are two fields that specify the firmware load
Note
for Modules 1 and 2. You can leave these fields blank to use the default firmware load.
Cisco Unified IP Phones Installation