Replacing The Starter Relay - Cornelius Energize 1 HC Installation And Service Manual

7.15

Replacing the starter relay

Prerequisites
The sheet casing has been removed (service).
Spare parts
Starter relay
1. Remove the cover (Fig. 38/1) from the electrical assembly.
2. Remove the fastening bolt (Fig. 39/1) from the electrical assembly.
3. Remove the electrical assembly.
4. Remove the electrical cables (Fig. 40/1) from the starter relay (Fig. 40/2).
5. Remove the starter relay (Fig. 40/2).
6. Position the new starter relay (Fig. 40/2).
7. Connect the electrical cables (Fig. 40/1) of the starter relay (Fig. 40/2).
8. Position the electrical assembly within the unit.
9. Fasten the electrical assembly into place using the fastening bolt (Fig. 39/1).
10. Attach the cover (Fig. 38/1) of the electrical assembly.
Finishing tasks
1. Mount the sheet casing; see chapter 7.2.
Cornelius Deutschland GmbH
Document no. TD1001100
Version 03/08/2018, Index 2
References
see chapter 7.2
ID/reference
440005121
Qty/ Comment
amount
1
1
Fig. 38
1
Fig. 39
1
1
2
Fig. 40
Installation and service manual Undercounter cooler
Repairs
1
Energize 1 HC
25