Table of Contents
Advertisement
MAKTEK Boiler has a high efficiency construction and provides economy by burning fuel fully.
The burner used in MAKTEK Boiler, is a high-quality burner with superior technology. It provides
high efficiency combustion, which provides the fuel air mixture at optimum concentration.
GENERAL WARNINGS AND RECOMMENDATIONS
The points to be followed by the user during oprating and maintenance are explained in this
manual.
The following suggestions and warnings must be cared in terms of safety and efficiency of the
system.
POINTS TO BE CONSIDER BY USERS
1- Receive your boiler in operative condition together with your installer system
2- Put your boiler in places where the plumber is suggests.
3- The boiler capacity is in 20.000 Kcal heating power, and heating more or less is linked to the
amount of radiator to be selected. In this regard, consider the suggestions of your plumber.
4- Prepare the chimney, chimney connection, water, fuel and electricity connection when the
central heating system is installed. Take care that the chimney connection is at the shortest
distance.
5- In the summer months when the boiler is not used, run the boiler at least once a month for 1-2
minutes. This will remove the chance of the circulation pump becoming trapped in the winter.
A. OPERATION OF THE BOILER
1-Check hydrometer to see if the expansion is filled with water. Do this check at any time during
the working period.
2- Check the fuel tank if it is full with diesel fuel. Do not use the fuel in the tank until if finishes for
fuel line not to make air.
3- Set your thermostat at the desired temperature (for ex. 50°- 60°-80°)
4- Check that the valve on the fuel line or at the fuel tank outlet if it is open.
5- Run your device by pressing the main control button (on the fron conrol panel )to ON position.
2
Advertisement
Table of Contents
