Table of Contents
Advertisement
2- It is enough to remove the burner barrel to reach the part of the burner taht containes the
turbulator, the injector and the electrodes.
3- Dismantling of burner electrodes, injectors and turbulators:
First, the cable headers with socket are removed from the double electrode.Then the screw
holding the turbulator is loosened and turbulator demounted from its place. The electrode holder
screw is demounted and electrode is removed from its place. The injector can be removed by
means of a key. The replacement of these elements is carried out by reversing the same order.
4
Advertisement
Table of Contents
