Rear - Sony UP-DR80MD Instructions For Use Manual

G Indicators
The indicators are as shown below:
A TRAY LOCK indicator
Lights when the media tray cannot be pulled out.
B RIBBON/PAPER indicator
Lights when an error involving the ink ribbon or
paper occurs.
Also, flashes while cleaning is in progress.
C ALARM indicator
Lights when an error such as a paper jam occurs.
D PRINT indicator
Lights while printing is in progress.
Do not pull out the media tray while the TRAY LOCK
indicator is lit. It may cause damage.
The location and cause of an error can be determined
according to which of the indicators (PRINT,
ALARM, RIBBON/PAPER and TRAY LOCK) are
on or flashing. For details, refer to "Explanation of
Indicators" on page 28.
H STOP button (page 20)
Press this button to stop a continuous printing
operation.
When this button is pressed, the printer returns to
ready state after the current page is printed and
ejected.
12
Location and Function of Parts and Controls

Rear

A OPTION connector (type A) indicator
Flashes if an unsupported device is connected.
B
OPTION connector
Supplies power to the accessory (sold separately).
WARNING
Using this unit for medical purposes
This connector is not isolated.
Do not connect any device other than a UPA-WU10
Wireless Print System powered exclusively by the
electric supply from the unit.
When a device that uses an alternating current is
connected, current leakage may result in an electric
shock to the patient or operator.
C
USB connector
Connects to a computer equipped with a USB
interface (which conforms to USB 2.0), etc., using a
USB cable (supplied).
D
Equipotential ground terminal connector
Used to connect to a ground (equipotential) plug to
bring the various parts of the system to the same
potential.
E Vent openings
F USB cable stopper (page 14)
Fixes the USB cable to prevent it from being
disconnected.
G Security slot
Used to attach a security cable.
H ~AC IN connector (page 14)
Use the power cord provided.