Installation; Installing The System - Pilz PSS Series Installation Manual

Installation

Installing the system

Drill 4 x M5 or M6 holes in the mounting plate of the control cabinet as
shown in Fig. 4-1 (tolerance: +/-0.3 mm/0.012"). Screw the PSS to the
mounting plate using washers.
Fig. 4-1: Installing the PSS system, dimensions stated in mm (")
Dimensions in mm ("):
H x W x D: 223 x 277 x 155 (8.78" x 10.91" x 6.10")
Installation Manual: PSS 3056 Series
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
POWER
ST AUTO PG
SPS
RUN ST
PG
FS RUN
RUN FS
STOP
4-1