Table of Contents
Advertisement
Cleaning
Remove excess clutter from floors before
cleaning. Use your robot frequently to maintain
well-conditioned floors.
EN
• Your robot will automatically explore and clean your home.
It will return to the charging station at the end of a cleaning
job and whenever it needs to recharge.
• To send the robot back to its charging station, tap
light ring pattern will indicate that the robot is seeking the
charging station.
• When your robot detects an especially dirty area, it will
engage Dirt Detect™ mode, moving in a forward/backward
motion to clean the area more thoroughly. The light ring
indicator will flash blue.
• Tap
to spot clean a designated area. The robot will spiral
outward about 3 feet (1 meter) and then spiral inward to
end where it started. The light ring indicator will show a blue
spiral.
When the robot senses its bin needs to be
CLEAN
emptied, the light ring indicator will illuminate
in a red sweeping motion toward the rear.
3
For more information, visit global.irobot.com
Just Press CLEAN
Tap to Start/Pause/Resume
Hold for 3 seconds to end a job
. A blue
Troubleshooting
• Your robot will tell you something is wrong by playing an audio alert and turning
the light ring indicator red. Press CLEAN or tap the bumper for details. Further
support and instructional videos are available in the iRobot HOME App.
Red Light Ring
Low battery. Please charge.
• After 90 minutes of inactivity off the charging station, the robot will
automatically end its cleaning job.
Battery Safety & Shipping
For best results, only use the iRobot Lithium Ion Battery that comes with your
robot.
WARNING
: Lithium ion batteries and products that contain lithium ion batteries are
subject to stringent transportation regulations. If you need to ship this product for
service, travel, or any other reason, you MUST follow the below shipping instructions.
• Battery MUST be turned off before shipping.
• Turn off the battery by removing the robot from the charging station and holding
down
for 10 seconds. All indicators will turn off.
• Package the robot securely for shipping.
• If you need further assistance, contact our Customer Care team or visit
global.irobot.com.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Roomba i7 and is the answer not in the manual?
Questions and answers
How do I re-Map the I7 roomba?
To re-map the iRobot Roomba i7, follow these steps:
1. Open the iRobot app and ensure your Roomba is paired.
2. Click on the map section in the app.
3. Select the option to create a new smart map.
4. Follow the mapping tips:
- Ensure the room has enough light.
- Open blinds, doors, and remove obstacles for better navigation.
5. Click "Next" and start a mapping run.
6. The Roomba will explore the space without cleaning to create a new map.
7. Ensure the battery is sufficiently charged for the mapping process to begin.
This process allows the Roomba to learn and update the map of your home.
This answer is automatically generated
WHERE DO I FIND ZONES
The iRobot Roomba i7 allows users to create "Keep Out Zones" but does not have an option to add "Cleaning Zones." Smart Mapping technology is used to define areas, and the robot may require multiple mapping runs to update new areas.
This answer is automatically generated
Why did the edge brush stop turning. i6
I need to order a brush replacement