Table of Contents
Advertisement
Cleaning the Front Caster Wheel
1
Pull firmly on the front wheel module to remove it
from the robot.
EN
2
Pull firmly on the wheel to remove it from its
housing (see illustration below).
3
Remove any debris from inside the wheel cavity.
4
Reinstall all parts when finished. Make sure the
wheel clicks back into place.
Important:
A front wheel clogged with hair and debris
could result in damage to your floor. If the wheel is not
spinning freely after you have cleaned it, please contact
Customer Care.
7
For more information, visit global.irobot.com
Axle
Wheel
Housing
Cleaning the Multi-Surface Brushes
1
Pinch the brush frame release
tab, lift the tab, and remove any
obstructions.
2
Remove the brushes from the
robot. Remove the brush caps
from the ends of the brushes.
Remove any hair or debris that
has collected beneath the
caps. Reinstall the brush caps.
3
Remove any hair or debris from
the square and hexagonal pegs
on the opposite side of the
brushes.
4
Remove the bin from the robot and
clear any debris from the vacuum
path.
5
Reinstall the brushes in the robot.
Match the shape of the brush pegs
with the shape of the brush icons in
the cleaning head module.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Roomba i7 and is the answer not in the manual?
Questions and answers
How do I re-Map the I7 roomba?
To re-map the iRobot Roomba i7, follow these steps:
1. Open the iRobot app and ensure your Roomba is paired.
2. Click on the map section in the app.
3. Select the option to create a new smart map.
4. Follow the mapping tips:
- Ensure the room has enough light.
- Open blinds, doors, and remove obstacles for better navigation.
5. Click "Next" and start a mapping run.
6. The Roomba will explore the space without cleaning to create a new map.
7. Ensure the battery is sufficiently charged for the mapping process to begin.
This process allows the Roomba to learn and update the map of your home.
This answer is automatically generated
WHERE DO I FIND ZONES
The iRobot Roomba i7 allows users to create "Keep Out Zones" but does not have an option to add "Cleaning Zones." Smart Mapping technology is used to define areas, and the robot may require multiple mapping runs to update new areas.
This answer is automatically generated
Why did the edge brush stop turning. i6
I need to order a brush replacement