Regulatory Information
Hereby, iRobot Corporation declares that this radio equipment
device is in compliance with the EU Radio Equipment Directive
2014/53/EU and the RoHS Directive 2011/65/EU. The full text of the
EU Declaration of Conformity is available at the following internet
address: www.irobot.com/compliance.
Hereby, iRobot Corporation declares that this radio equipment
device is in compliance with the EU Radio Equipment Directive
2014/53/EU and the RoHS Directive 2011/65/EU. The full text of
the UKCA Declaration of Conformity is available at the following
internet address: www.irobot.com/compliance.
Regulatory Model RVB-Y1 incorporates the Trident radio module model
AXC-Y1. The Trident radio module is a dual band radio which operates in the
WLAN 2.4GHz and WLAN 5GHz bands.
• The 2.4 GHz band is limited to operate between 2400 MHz — 2483.5
MHz MHz with a maximum EIRP output power of 18.48dBm (70.47mW) at
2412MHz.
• The 5 GHz band is limited to operate between 5150 MHz — 5850 MHz with
a maximum EIRP output power of 21.02 dBm (126.47 mW) at 5180 MHz.
• For Israel, the 5GHz band is limited to operate in the 5150MHz-
5350MHz band.
Or,
Regulatory Model RVB-Y2 incorporates the Harpoon radio module model
AXE-Y1. The Harpoon radio module is a dual band radio which operates in
the WLAN 2.4GHz and WLAN 5GHz bands.
©2020 iRobot Corporation, 8 Crosby Drive, Bedford, MA 01730 USA. All rights reserved.
iRobot, Roomba, iAdapt and Virtual Wall are registered trademarks of iRobot Corporation.
Home Base and Dirt Detect are trademarks of iRobot Corporation. Wi-Fi and the Wi-Fi
logo are registered trademarks of Wi-Fi Alliance.
• The 2.4 GHz band is limited to operate between 2400 MHz and
2483 MHz with a maximum EIRP output power of 17.56 dBm (57
mW) at 2472 MHz.
• The 5 GHz band is limited to operate between 5150 MHz and 5725
MHz with a maximum EIRP output power of 18.23 dBm (66.52 mW)
at 5700 MHz.
• For Israel, the 5GHz band is limited to operate in the 5150MHz-
5350MHz band.
This symbol on the product indicates that the appliance must not be
disposed of with unsorted common municipal waste. As the end-
user, it is your responsibility to dispose of the end-of-life appliance in
an environmentally sensitive manner as follows:
• (1) returning it to the distributor/dealer from whom you purchased
the product; or
• (2) depositing it in a designated collection point.
Disposing of this product correctly will help save valuable resources
and prevent any potential negative effects on human health and
the environment, which could otherwise arise from inappropriate
waste handling. Please contact your local authority for further
details or your nearest designated collection point. Penalties may
be applicable for incorrect disposal of this waste, in accordance
with your national legislation. More information may be found at the
following source:
http://ec.europa.eu/environment/waste/weee/index_en.htm
Need help?
Do you have a question about the Roomba i7 and is the answer not in the manual?
Questions and answers
How do I re-Map the I7 roomba?
To re-map the iRobot Roomba i7, follow these steps:
1. Open the iRobot app and ensure your Roomba is paired.
2. Click on the map section in the app.
3. Select the option to create a new smart map.
4. Follow the mapping tips:
- Ensure the room has enough light.
- Open blinds, doors, and remove obstacles for better navigation.
5. Click "Next" and start a mapping run.
6. The Roomba will explore the space without cleaning to create a new map.
7. Ensure the battery is sufficiently charged for the mapping process to begin.
This process allows the Roomba to learn and update the map of your home.
This answer is automatically generated
WHERE DO I FIND ZONES
The iRobot Roomba i7 allows users to create "Keep Out Zones" but does not have an option to add "Cleaning Zones." Smart Mapping technology is used to define areas, and the robot may require multiple mapping runs to update new areas.
This answer is automatically generated
Why did the edge brush stop turning. i6
I need to order a brush replacement