Table of Contents
Advertisement
Cleaning the Full Bin Sensors
1
Remove and empty the bin.
2
Wipe the inner sensors with a clean,
dry cloth
3
Wipe the bin door with a clean, dry cloth.
Closed Door
Opened Door
Washing the Bin
Important:
Do not wash the filter. Remove
the filter before washing the bin.
1
Release the bin, remove the filter,
and open the bin door.
2
Rinse the bin using warm water.
Note:
Bin is not dishwasher safe.
3
Make sure bin is completely dry. Reinsert
filter and place bin back in the robot.
Cleaning the Edge-Sweeping Brush
1
Use a coin or small screwdriver to
remove the screw holding the Edge-
Sweeping Brush in place.
2
Pull to remove the Edge-Sweeping
Brush. Remove any hair or debris, then
reinstall the brush.
Roomba
i7 Owner's Guide
®
EN
6
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Roomba i7 and is the answer not in the manual?
Questions and answers
How do I re-Map the I7 roomba?
To re-map the iRobot Roomba i7, follow these steps:
1. Open the iRobot app and ensure your Roomba is paired.
2. Click on the map section in the app.
3. Select the option to create a new smart map.
4. Follow the mapping tips:
- Ensure the room has enough light.
- Open blinds, doors, and remove obstacles for better navigation.
5. Click "Next" and start a mapping run.
6. The Roomba will explore the space without cleaning to create a new map.
7. Ensure the battery is sufficiently charged for the mapping process to begin.
This process allows the Roomba to learn and update the map of your home.
This answer is automatically generated
WHERE DO I FIND ZONES
The iRobot Roomba i7 allows users to create "Keep Out Zones" but does not have an option to add "Cleaning Zones." Smart Mapping technology is used to define areas, and the robot may require multiple mapping runs to update new areas.
This answer is automatically generated
Why did the edge brush stop turning. i6
I need to order a brush replacement