Page 1
Safety Information Important Safety Information This owner's guide includes information for Regulatory Model(s): RVD-Y1 SAVE THESE INSTRUCTIONS WARNING: When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS WARNING: To reduce the risk of injury or damage, read and follow the safety precautions when setting up, using, and maintaining your robot.
Page 2
CAUTION WARNING: Indicates a hazardous situation that, if not avoided, could result in death or serious injury. • Do not operate the robot in areas with exposed electrical sockets CAUTION: Indicates a hazardous situation that, if not avoided, could in the floor. result in minor or moderate injury.
Page 3
• If you live in an area prone to electrical storms, it is or disposal. recommended that you use additional surge protection. • For best results, only use the iRobot Lithium Ion Battery that comes Your Home Base may be protected with a surge protector with the robot.
Home Base. You can put the robot in a further-reduced power state when not in use. For instructions and more details on *Objects are not to scale. this Reduced Power Standby Mode, refer to the iRobot HOME WARNING: To prevent the risk of your robot falling down stairs when App.
Page 6
Base. • When your robot detects an especially dirty area, it will go • If you are unsure if the robot is finished or paused, consult the iRobot HOME into Dirt Detect™ mode, moving over the area multiple times App to check on its status.
Page 7
Accessories Choose the mode to meet your needs: Virtual Wall Mode: When the switch is in the Virtual Wall position ( ), the device will create a linear barrier to block openings up to 10 feet (3 metres). Dual Mode Virtual Wall Barrier* ®...
Place bin back in the robot. Note: iRobot manufactures various replacement parts and assemblies. If you think you need a replacement part, please contact iRobot Customer Important: The robot will not run if Care for more information.
Page 9
Cleaning the Full Bin Sensors Washing the Bin Cleaning the Edge-Sweeping Brush Remove and empty the bin. Use a small screwdriver to loosen the Important: Do not wash the filter. Remove screw holding the Edge-Sweeping Brush the filter before washing the bin. in place.
Page 10
If the wheel is not with the shape of the brush icons in spinning freely after you have cleaned it, please contact the cleaning head module. Customer Care. For more information, visit global.irobot.com...
You can start by visiting global.irobot.com for support tips, frequently asked questions and information about accessories. This information can also be found in the iRobot HOME App. If you need further assistance, call our Customer Care team at (877) 855-8593.
Need help?
Do you have a question about the Roomba i3 and is the answer not in the manual?
Questions and answers
how to reboot i Robot i3evo? "Bumper Stuck" ?