Table of Contents
Advertisement
Accessories
Dual Mode Virtual Wall
Barrier
®
Note:
For best results, place at least 8 feet (2.5 meters) from the charging
station.
Use the Dual Mode Virtual Wall
®
barrier to keep the robot in the places
you want cleaned — and out of the ones you don't. It creates an
invisible barrier that only the robot can see. You can leave the device
in position between cleanings.
Choose the mode to meet your needs:
Virtual Wall Mode:
When the switch is in the Virtual Wall position (
device will create a linear barrier to block openings up to 10 feet (3 meters).
Note:
This barrier gets wider as it gets further from the device (refer
to illustration).
Halo Mode:
Toggle the switch to the Halo position (
circular barrier. This will prevent the robot from approaching zones you
want to protect such as a pet bowl, vase, or under a desk. The Halo
barrier extends approximately 12 inches (30 centimetres) from the centre
of the device.
Note:
The batteries will last about 8-10 months under normal use. If you are
not planning to use your Virtual Wall barrier for an extended period of time,
be sure to turn the switch to the Off or middle position.
), the
), to create a
4
Roomba
i7 Owner's Guide
®
EN
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Roomba i7 and is the answer not in the manual?
Questions and answers
How do I re-Map the I7 roomba?
To re-map the iRobot Roomba i7, follow these steps:
1. Open the iRobot app and ensure your Roomba is paired.
2. Click on the map section in the app.
3. Select the option to create a new smart map.
4. Follow the mapping tips:
- Ensure the room has enough light.
- Open blinds, doors, and remove obstacles for better navigation.
5. Click "Next" and start a mapping run.
6. The Roomba will explore the space without cleaning to create a new map.
7. Ensure the battery is sufficiently charged for the mapping process to begin.
This process allows the Roomba to learn and update the map of your home.
This answer is automatically generated
WHERE DO I FIND ZONES
The iRobot Roomba i7 allows users to create "Keep Out Zones" but does not have an option to add "Cleaning Zones." Smart Mapping technology is used to define areas, and the robot may require multiple mapping runs to update new areas.
This answer is automatically generated
Why did the edge brush stop turning. i6
I need to order a brush replacement