Controlled Energy Cons; Service; Clean Drain Pump; Service Interval - Miele PWM 908 Operating And Installation Instructions

Supervisor level
If the automatic load control is
deactivated, the machine will always
carry out the programme sequence
based on a full load.
Factory setting: On

Controlled energy cons.

With this option selected, the machine
will optimise its energy consumption in
the White items, Coloured items and
Minimum iron programmes.
Factory setting: On

Service

Clean drain pump

The user sees a message when the
drain pump filter has to be cleaned.
The message is displayed every 500
operating hours.
The message appears at the end of the
programme.
Factory setting: Off
92

Service interval

Service information can appear in the
display. You can configure whether a
date or the number of operating hours
is displayed.
You can select up to 3 messages with
your own text.
Your message is displayed at the end of
the programme and can be
acknowledged with OK. The same
message appears at the end of the next
programme.
Settings
This setting allows you to determine the
interval (by hours or date) at which the
message appears.
– Factory setting: Off
– by time
You can then select a time interval
between 1-9999 hours.
– by date
You can then select a date.
Message text
Enter your individual message text for
your planned maintenance work.
Reset display
The message will appear until the
display is permanently reset. The
message then only appears again when
the next interval is reached.