Miele PWM 908 Operating And Installation Instructions page 64

Problem solving guide
Problem
There is water next to
the capsule in the fabric
softener compartment.
The drum remains
stationary but the
programme keeps
running.
64
Possible cause and remedy
The CapDosing sensor was not activated or an empty
capsule was not removed at the end of the last wash
programme.
 Activate the
CapDosing
used the next time.
 Remove and dispose of the empty capsule at the
end of each programme.
The small pipe in the detergent dispenser drawer onto
which the capsule is placed is blocked.
 Clean the small pipe.
 Switch the washing machine off and then back on
with the  button.
 Note the message in the display.
 Touch the Start/Stop sensor.
The programme will continue and the drum will spin.
sensor when a capsule is