Process Technology; Anti-Crease; Water Level Cottons; Water Level Minimum Iron - Miele PWM 908 Operating And Installation Instructions

Supervisor level

Process technology

Anti-crease

The anti-crease function helps prevent
creasing if laundry is not going to be
removed immediately after the end of
the programme. The drum continues
to turn at intervals for up to 30 minutes
after the end of the programme.
The door can be opened at any time
during the anti-crease phase.
Factory setting: On

Water level Cottons

In the Cottons programme, you can
increase the water level of the main
wash.
– + 0 mmWS (factory setting)
– + 10 mmWS
– + 20 mmWS
– + 30 mmWS

Water level Minimum iron

In the Minimum iron programme, you
can increase the water level of the
main wash.
– + 0 mmWS (factory setting)
– + 10 mmWS
– + 20 mmWS
– + 30 mmWS
90

Pre-wash temp. Cottons

In the Cottons programme, you can
select the temperature of the pre-
wash.
– 30°C (factory setting)
– 35°C
– 40°C
– 45°C

Wash time

Cottons pre-wash
In the Cottons programme, you can
select the duration of the pre-wash.
– + 0 min (factory setting)
– + 6 min
– + 9 min
– + 12 min
Cottons
In the Cottons programme, you can
select the duration of the main wash.
– + 0 min (factory setting)
– + 10 min
– + 20 min
– + 30 min
– + 40 min